- Administration >
- Configuration and Maintenance >
- Run-time Database Configuration
Run-time Database Configuration¶
On this page
The command line and configuration file interfaces provide MongoDB administrators with a large number of options and settings for controlling the operation of the database system. This document provides an overview of common configurations and examples of best-practice configurations for common use cases.
While both interfaces provide access to the same collection of options and settings, this document primarily uses the configuration file interface. If you run MongoDB using a init script or if you installed from a package for your operating system, you likely already have a configuration file located at /etc/mongod.conf. Confirm this by checking the contents of the /etc/init.d/mongod or /etc/rc.d/mongod script to ensure that the init scripts start the mongod with the appropriate configuration file.
To start a MongoDB instance using this configuration file, issue a command in the following form:
mongod --config /etc/mongod.conf
mongod -f /etc/mongod.conf
Modify the values in the /etc/mongod.conf file on your system to control the configuration of your database instance.
Configure the Database¶
Consider the following basic configuration which uses the YAML format:
processManagement:
fork: true
net:
bindIp: 127.0.0.1
port: 27017
storage:
dbPath: /srv/mongodb
systemLog:
destination: file
path: "/var/log/mongodb/mongod.log"
logAppend: true
storage:
journal:
enabled: true
Or, if using the older .ini configuration file format:
fork = true
bind_ip = 127.0.0.1
port = 27017
quiet = true
dbpath = /srv/mongodb
logpath = /var/log/mongodb/mongod.log
logappend = true
journal = true
For most standalone servers, this is a sufficient base configuration. It makes several assumptions, but consider the following explanation:
fork is true, which enables a daemon mode for mongod, which detaches (i.e. “forks”) the MongoDB from the current session and allows you to run the database as a conventional server.
bindIp is 127.0.0.1, which forces the server to only listen for requests on the localhost IP. Only bind to secure interfaces that the application-level systems can access with access control provided by system network filtering (i.e. “firewall”).
port is 27017, which is the default MongoDB port for database instances. MongoDB can bind to any port. You can also filter access based on port using network filtering tools.
注解
UNIX-like systems require superuser privileges to attach processes to ports lower than 1024.
quiet is true. This disables all but the most critical entries in output/log file, and is not recommended for production systems. If you do set this option, you can use setParameter to modify this setting during run time.
dbPath is /srv/mongodb, which specifies where MongoDB will store its data files. /srv/mongodb and /var/lib/mongodb are popular locations. The user account that mongod runs under will need read and write access to this directory.
systemLog.path is /var/log/mongodb/mongod.log which is where mongod will write its output. If you do not set this value, mongod writes all output to standard output (e.g. stdout.)
logAppend is true, which ensures that mongod does not overwrite an existing log file following the server start operation.
storage.journal.enabled is true, which enables journaling. Journaling ensures single instance write-durability. 64-bit builds of mongod enable journaling by default. Thus, this setting may be redundant.
Given the default configuration, some of these values may be redundant. However, in many situations explicitly stating the configuration increases overall system intelligibility.
Security Considerations¶
The following collection of configuration options are useful for limiting access to a mongod instance. Consider the following settings, shown in both YAML and older configuration file format:
In YAML format
security:
authorization: enabled
net:
bindIp: 127.0.0.1,10.8.0.10,192.168.4.24
Or, if using the older older configuration file format:
bind_ip = 127.0.0.1,10.8.0.10,192.168.4.24
auth = true
Consider the following explanation for these configuration decisions:
“bindIp” has three values: 127.0.0.1, the localhost interface; 10.8.0.10, a private IP address typically used for local networks and VPN interfaces; and 192.168.4.24, a private network interface typically used for local networks.
Because production MongoDB instances need to be accessible from multiple database servers, it is important to bind MongoDB to multiple interfaces that are accessible from your application servers. At the same time it’s important to limit these interfaces to interfaces controlled and protected at the network layer.
“authorization” is true enables the authorization system within MongoDB. If enabled you will need to log in by connecting over the localhost interface for the first time to create user credentials.
参见
Replication and Sharding Configuration¶
Replication Configuration¶
Replica set configuration is straightforward, and only requires that the replSetName have a value that is consistent among all members of the set. Consider the following:
In YAML format
replication:
replSetName: set0
Or, if using the older configuration file format:
replSet = set0
Use descriptive names for sets. Once configured, use the mongo shell to add hosts to the replica set.
To enable authentication for the replica set, add the following keyFile option:
In YAML format
security:
keyFile: /srv/mongodb/keyfile
Or, if using the older configuration file format:
keyFile = /srv/mongodb/keyfile
Setting keyFile enables authentication and specifies a key file for the replica set member use to when authenticating to each other. The content of the key file is arbitrary, but must be the same on all members of the replica set and mongos instances that connect to the set. The keyfile must be less than one kilobyte in size and may only contain characters in the base64 set and the file must not have group or “world” permissions on UNIX systems.
参见
The Replica Set Security section for information on configuring authentication with replica sets.
The 复制 document for more information on replication in MongoDB and replica set configuration in general.
Sharding Configuration¶
Sharding requires mongod instances with different mongod configurations for the config servers and the shards. The config servers store the cluster’s metadata, while the shards store the data.
To configure the config server mongod instances, in the configuration file, specify configsvr for the sharding.clusterRole setting.
在 3.4 版更改: Starting in version 3.4, MongoDB removes support for mirrored config servers and config servers must be deployed as a replica set. See Upgrade Config Servers to Replica Set.
sharding:
clusterRole: configsvr
net:
bindIp: 10.8.0.12
port: 27001
replication:
replSetName: csRS
To deploy config servers as a replica set, the config servers must run the WiredTiger Storage Engine. Initiate the replica set and add members.
To configure the shard mongod instances, specify shardsvr for the sharding.clusterRole setting, and if running as a replica set, the replica set name:
sharding:
clusterRole: shardsvr
replication:
replSetName: shardA
If running as a replica set, initiate the shard replica set and add members.
For the router (i.e. mongos), configure at least one mongos process with the following setting:
sharding:
configDB: csRS/10.8.0.12:27001
You can specify additional members of the config server replica set by specifying hostnames and ports in the form of a comma separated list after the replica set name.
参见
The 分片 section of the manual for more information on sharding and cluster configuration.
Run Multiple Database Instances on the Same System¶
In many cases running multiple instances of mongod on a single system is not recommended. On some types of deployments [1] and for testing purposes you may need to run more than one mongod on a single system.
In these cases, use a base configuration for each instance, but consider the following configuration values:
In YAML format:
storage:
dbPath: /srv/mongodb/db0/
processManagement:
pidFilePath: /srv/mongodb/db0.pid
Or, if using the older configuration file format:
dbpath = /srv/mongodb/db0/
pidfilepath = /srv/mongodb/db0.pid
The dbPath value controls the location of the mongod instance’s data directory. Ensure that each database has a distinct and well labeled data directory. The pidFilePath controls where mongod process places it’s process id file. As this tracks the specific mongod file, it is crucial that file be unique and well labeled to make it easy to start and stop these processes.
Create additional init scripts and/or adjust your existing MongoDB configuration and init script as needed to control these processes.
| [1] | Single-tenant systems with SSD or other high performance disks may provide acceptable performance levels for multiple mongod instances. Additionally, you may find that multiple databases with small working sets may function acceptably on a single system. |
Diagnostic Configurations¶
The following configuration options control various mongod behaviors for diagnostic purposes:
operationProfiling.mode sets the database profiler level. The profiler is not active by default because of the possible impact on the profiler itself on performance. Unless this setting is on, queries are not profiled.
operationProfiling.slowOpThresholdMs configures the threshold which determines whether a query is “slow” for the purpose of the logging system and the profiler. The default value is 100 milliseconds. Set a lower value if the database profiler does not return useful results or a higher value to only log the longest running queries.
systemLog.verbosity controls the amount of logging output that mongod write to the log. Only use this option if you are experiencing an issue that is not reflected in the normal logging level.
在 3.0 版更改: You can also specify verbosity level for specific components using the systemLog.component.<name>.verbosity setting. For the available components, see component verbosity settings.
For more information, see also Database Profiling and MongoDB Performance.